Thursday, May 3, 2018

Industri Pabrikator Baja Lokal Kalah Saing dari China



Industri pabrikator baja dalam negeri mengalami hambatan untuk bersaing dengan produk impor dari China. Asosiasi pun akan berjuang agar pemerintah melindungi produk berbahan baja hasil pabrikan domestik.

Ketua Umum Asosiasi Pabrikator Baja Indonesia (Apbindo) Agus Budhiarto mengatakan dengan gencarnya pembangunan proyek infrastruktur pemerintah, peluang pabrikator baja nasional terbuka lebar. Namun, pada kenyataannya pabrikan dalam negeri menghadapi kendala untuk bersaing dengan produk impor.

“Banyak barang impor yang masuk, baik material impor maupun barang jadi impor. Kami sulit bersaing dengan produk impor,” ujarnya kepada Bisnis.com, Kamis (21/12/2017).

Agus menyebutkan barang jadi yang diimpor dari China masuk dengan bea masuk yang rendah dan dipasarkan dengan harga yang murah. Selisih harga material baja dengan produk barang jadi impor sangat tipis, padahal untuk mengolah material baja menjadi barang jadi produsen dalam negeri mengeluarkan biaya yang tidak sedikit.

Dia mencontohkan untuk menghasilkan barang jadi, seperti tower listrik, pabrikan harus mengeluarkan biaya untuk membeli baut, melapisi baja siku dengan lapisan anti karat atau galvanized, dan membayar upah tenaga kerja.

“Kami beli material baja misal harganya 9.000, sedangkan harga barang jadi impor 11.000, selisih hanya 2.000. Untuk mengubah material baja menjadi barang jadi, kami harus mengeluarkan biaya ekstra, seperti tenaga kerja 2.000, galvanized 4.000, jadinya harga produk jadi kami lebih mahal,” jelas Agus.

BACA JUGA:


Untuk mendorong pertumbuhan industri pabrikator dalam negeri, Apbindo pada tahun depan berencana untuk mengusulkan proteksi bagi produk domestik ke Kementerian Perindustrian. Asosiasi juga berharap agar penerapan tingkat komponen dalam negeri (TKDN) benar-benar diawasi dan diberi sanksi tegas bagi proyek yang menerapkan TKDN di bawah besaran yang telah ditetapkan.

Dia mencontohkan ada anggota asosiasi yang tidak bisa masuk ke proyek pembangunan jalan tol untuk memasok guardrail karena kalah bersaing dengan produk impor. “Padahal perusahaan tersebut beli plat baja Krakatau Steel dan proses galvanized-nya di sini,” ujarnya.

Adapun, Apbindo merupakan asosiasi yang baru terbentuk pada 12 Desember 2017 dan beranggotakan perusahaan-perusahaan yang memproduksi berbagai barang berbahan baku baja, seperti tower listrik, tangki, jembatan besar, crane, dan lainnya.

Beberapa perusahaan yang menjadi pendiri Apbindo antara lain PT Danusari Mitra Sejahtera, PT Cahaya Metal  Perkasa, PT Artha Mas Graha Andalan, PT Mega Karya Sampurna, dan PT Helori Graha Sarana.
Baca Selengkapnya ...
Monday, August 10, 2009

Type steel

Type steel
1.Cold Rolled Steels
-JIS : SPCC, SPCD, SPCE
-SAE : SAE1006∼1030
-AISI : AISI1008, 1010, 1019, 1023, 1030

2. Special Steels
-JIS : S10C∼S55C, SK-3, 4, 5, SUP10, SCM430, SCM435, SNCM220
-SAE : SAE1010∼1055, SAE1526, 1527, 1536, 1541, SAE950B
-DIN : DN-50CrV4

3. Auto Mobile Structure Steels
-JIS: SAPH310, 370, 400, 440, SPFH540, 590

4. Structure Steel
-JIS : SS330, SS400, SS490, SS540
-ASTM : A36, A283, A570
-BS : BS1449 50/35HR,HS, BS4360 43A,B,C, 50B,C
-DIN : DIN17100 ST22, 33, ST52-3, RST37-2
Baca Selengkapnya ...
Friday, August 7, 2009

TEHNOLOGY METAL STEEL TYPE

TEHNOLOGY METAL STEEL TYPE

Titanium:
6AL-4V, 6-6-2, 6-2-4-2, 10-2-3 & CP GR. 1,2,3 & 4
Nickel: Monel 200, 400, 500, 600, 625, 718, Hastelloy & Waspally
Super Alloys:
L-605, Rene 41, MP 35 N, Aermet 100 & MP 350
Stainless:
301, 302/304, 316, 321, 410, 418, 440C &A286
Heat Treatable:
13-8 MO, 15-5 PH, 17-4 PH & 17-7 PH
Alloy Steel:
4130, 4140, 4330, 4340, 300M, 52100, 8620 & 9310
Magnesium:
AZCOML, AZ61A, AZ31B & ZK60A
Aluminum:
2014, 2024, 2124, 2219, 3003, 5052, 6061, 7050,7075 & 7475
Baca Selengkapnya ...
Sunday, July 19, 2009

Steel 4140, SCM 440, 709, VCL 140,DIN 7225, 42CrMo4

An analysis of grinding power and surface roughness in external cylindrical grinding of hardened SCM440 steel using the response surface method
Auteur(s) / Author(s)
KWAK Jae-Seob (1) ; SIM Sung-Bo (1) ; JEONG Yeong-Deug (1) ;
Affiliation(s) du ou des auteurs / Author(s) Affiliation(s)
(1) School of Mechanical Engineering, Pukyong National University, San 100, Yongdang-Dong, Nam-Ku, Busan 608-739, COREE, REPUBLIQUE DE
Résumé / Abstract
The aim of this study was to analyze effectively the grinding power spent during the process and the surface roughness of the ground workpiece in the external cylindrical grinding of hardened SCM440 steel using the response surface method. A Hall effect sensor was used for measuring the grinding power of the spindle driving motor.
The surface roughness was also measured and evaluated according to the change of the grinding conditions. Response surface models were developed to predict the grinding power and the surface roughness using the experimental results. From adding simply material removal rate to the contour plot of these mathematical models,
it was seen that useful grinding conditions for industrial application could be easily determined.
Revue / Journal Title
International journal of machine tools & manufacture ISSN 0890-6955 CODEN IMTME3
Source / Source
2006, vol. 46, no3-4, pp. 304-312 [9 page(s) (article)] (11 ref.)
Langue / Language
Anglais
Editeur / Publisher
Elsevier, Oxford, ROYAUME-UNI (1987) (Revue)
Mots-clés anglais / English Keywords
Experimental study ; Measurement sensor ; Modeling ; Response surface ; Ground surface ; Metal ; Steel ; Rough surface ; Cutting speed ; Operating conditions ; Hall effect ; Machining ; Grinding ; Cylindrical grinding ; Roughness ; Surface grinding ;
Mots-clés français / French Keywords
Etude expérimentale ; Capteur mesure ; Modélisation ; Surface réponse ; Surface sol ; Métal ; Acier ; Surface rugueuse ; Vitesse coupe ; Condition opératoire ; Effet Hall ; Usinage ; Rectification surface ; Rectification cylindrique ; Rugosité ; Rectification plane ;
Mots-clés espagnols / Spanish Keywords
Estudio experimental ; Captador medida ; Modelización ; Superficie respuesta ; Superficie suelo ; Metal ; Acero ; Superficie rugosa ; Velocidad corte ; Condición operatoria ; Efecto Hall ; Mecanizado ; Rectificación superficie ; Rectificación cilíndrica ; Rugosidad ; Rectificación plana ;
Mots-clés d'auteur / Author Keywords
Grinding power ; Surface roughness ; External cylindrical grinding ; Response surface method ;
Localisation / Location
INIST-CNRS, Cote INIST : 1357, 35400013302717.0080

A combined instrument for ultra-microhardness testing and atomic force microscopy (AFM) has been developed. The instrument could be employed to conduct hardness tests with a diamond indenter and its Si tip allowed high-resolution AFM images to be obtained at the same position on the specimen.
Ultra-microhardness tests and AFM observations were carried out on electrolytically polished specimens of a tungsten single crystal and JIS-SCM415 and JIS-SCM440 low-alloy steels. The SCM415 and 440 steels were tempered at 873K and 723K, respectively. The benefits of using a Si tip instead of
a diamond indenter for AFM observation are clearly shown by the better profile of the indent mark on the tungsten single crystal and the clearly distinguishable images of the fine carbides of the steels. The ultra-microhardness of the steels was influenced by the local microstructures such as the carbide density and the presence of a ferritic phase.

Fatigue tests of SCM 440 chromium molybdenum steel were carried out under high mean stress. Prediction method of fatigue strength based on fracture mechanics was developed and the following conclusions reached. (1) It has been shown that the ΔK_ becomes constant value at strain ratio R_ε > 0.5,
just as the fatigue limit becomes constant at R_ε> 0.5 .(2) It has been shown that the fatigue diagram could make without fatigue tests, if the range of stress intensity factor ΔK of intrinsic crack was compared with ΔK_ in various mean stress. (3) The prediction fatigue limit is in good agreement with the experimental value under high mean stress.

Product Description
42CrMo, 4140, SCM440
It's one kinds of high quality alloy structural steel.
Features: With high intensity, high hardenability. It has a small distortion afer quenching, a ghigh creep strength and lasting intensity afer processing of high tempreature.
Chemical composition: C: 0.38-0.45%, Si: 0.17-0.37%, Cr: 0.90-1.20%, Mn: 0.50-0.80%, Mo: 0.15-0.25%, S\P≤0.035%, Ni\Cu≤0.030%
Usage: It's mainly used for making various kinds of machinery, automobile, mining spare part, the gearwheel of the engine, the driving gear of supercharger, the abckshaft, the conncetingrob and the pinchock under the high pressure.

Hot forged steel round bar.
Steel grade:S45C,SCM440,SCM439,SCM420,SCM415,SCM435,S20C,
16MnCr5,S355J2G3,Q390,42CrMo4,25CrMo4,39CrNiMo3,34CrNiMo6,
SAE4340,18CrNiMo7-6,CK15,SAE8620,21CrNiMo2,41Cr4 and so on.
Carbon steel and alloy steel.
Size:150mm to 700mm.
Length:4m and up.
Ultrasonic Test:Sep1921 Class 3 C/c.
Delivery Condition:Hot forged+Normalized+Rough Turned+Q/T.
We supply the high quality material for customer.
Mill:Jiangsu Zhuhong Forging Co.,Ltd

Materials:Hot forged steel round bar.
Steel Grade:S45C,SCM440,42CrMo4,CK45,16MnCr5,S355J2G3,SCM415,
18CrNiMo7-6,34CrNiMo6,39CrNiMo3,20CrNiMo2,ASTM A105,SAE8620,
and others.
Standard: EN10025,EN10083
1). Delivery state: Hot forged +Normalizing/Annealing+Rough Turned+ Quench+ Temper,
2). Size: 150mm~700mm
3). Length: 4000mm ~5800mm
4). Inspecting: UTS according to SEP 1921 C/c or GB/T 6402
5). Cut both ends
6). Payment: L/C at sight or others.
7). Min. qty.: 15MT
8). Delivery: By both negotiation.
9). Delivery time: 50 days after L/C.
Products were exported to Korea,Taiwan,Europe,USA.

STEEL COMPARISON TABLE
DIN/AISI/JIS/ASSAB /BOHLER /TYSEN /DESCRIPTION

CK 45 / 1045 / S 45 C / 760 /EMS /Thyrodur 1730 /Carbon steel

C105w1 / W1 /SK 3/4 /K 100 /Extra TH /Thyrodur 1545 /Hight carbon steel

X100CrMoV51 /A2 /SKD 12 /XW 10 /Special K5 /Thyrodur 2363 /Cold work tool st

X155CrVMo121 /D2 /SKD 11 /XW 41 /Special KNL /Thyrodur2379 /High Carbon Crom

X210CrW12 /D6 /SKD 2 /XW 5 /Special KR /Thyrodur 2436 /High carbon Crom st

MnCrV 8 /0,2 /SKS 3 /DF 2 /Amutit S /Thyrodur 2842 /Cold Work Tool St

40CrMnMoS 8 6 /P20/ - /718 K /456 /Thyroplast2312 /Plastict Mold st

X 42 Cr 13 /420 /sus 538 /stavax /WKW35M /Thyroplast2083 /Plastict coro.ressis Mold

-CrNiMo 6 /4337*4340 /SNC22 /705 /VCN 150 /TEW 6582 /High Tensile st

42 CrMo 4, 4140, SCM 440, 709, VCL-140, TEW 7225, High Tensile st

DIN = Deutsche Institut Fuer Normung
AISI = American Iron and Steel Institute
JIS = Japan Industrial Standart

42 CrMo 4 /4140 /SCM 440 /709 /VCL 140 /TEW 7225 /High Tensile st

IS : 40Cr4Mo3
42Cr4Mo2
40Cr1Mo28
AISI : 4137 4137H
4140 4140H
4142 4142H
DIN : 42CrMo4
BS970: 708A37
708A42
708H37
708H42
708H45
708M40
709M40
EN : 19
19A
19B
19C

JIS : SCM440
SCM440H
SCM445
SCM445H

-CrNiMo 6 /4337*4340 /SNC22 /705 /VCN 150 /TEW 6582 /High Tensile st

IS : 40Ni6Cr4Mo3
40Ni2Cr1mo28
40Ni6CrMo2
AISI : 4337
4340
4340H
BS970: 817A37
817A42
817M40
EN : 24

Product Description
Specification:CK45,42CrMo4/SCM440,
S355J2G3,16MnCr5,39CrNiMo3,34CrNiMo6,
15CrNiMo7-6,1.2714,SAE8620,15CrNiMo5,
SAE8620,And others
Standard: DIN 7527-6,EN 10204,SEP 1921,EN 10228-3,EN 10250,N10083,SEW 550

Hot forged steel round bar.
Steel grade:S45C,SCM440,SCM439,SCM420,SCM415,SCM435,
S20C,16MnCr5,S355J2G3,Q390,42CrMo4,25CrMo4,39CrNiMo3,
34CrNiMo6,SAE4340,18CrNiMo7-6,CK15,SAE8620,21CrNiMo2,
41Cr4 and so on.

Forged steel round bar S45C
Commodity: Forged steel round bar
Grade: S45C, delivery condition: as forged.
Length : 4.0 - 6.0m
Diameter tolerance:-0/+7mm
Process : EAF + LF + VD ( 100% )
Straightness:4mm/M Max.
Ultra sonic test: Sep1921-84 Class 3 C/c
Surface Condition : Black ( No Grinding )
Cutting : End Bar must be Saw Cutting
Manufacture:Jiangsu Zhuhong Forging Co.,Ltd

Forged rollers SCM440
Commodity: Forged rollers
Size:385x765+910x677+385x350mm
Sizes tolerance: -0/+5mm according to the drawings.
Delivery state:normalized+ rough turned.
Ultrasonic test: Sep1921 Class C/c.
Quality certificate:as per EN 10204/3.1.B
Manufacture:Jiangsu Zhuhong Forging Co.,Ltd
Note:we can supply the rollers according the customer's drawing of different size
and requirement.

Forged round bar SAE8620/21CrNiMo2/42CrMo
Grade:SAE8620/21CrNiMo2,42CrMo/42CrMo4/SAE4140/SCM440;34CrNiMo6/4340/718M40;ASTM A105,S355J2G3,
16Mn,C60,C45,35CrMo,15CrMo,18CrNiMo7-6,39CrNiMo3,
16MnCr5,25CrMo
Size:120-1000mm
Delivery condition:forged+Annelaed/Normalized+Q/T+Rough Turned.
Ultrasonic Test:Sep1921 Class D/d,C/c.
Length:4m and up or fix length according the customer's requirment.
Manufacture:Jiangsu Zhuhong Forging Co.,Ltd.

Stocklistof Forged square bar SCM415,SCM435
Stockof Forged square bars
GradeSCM415,SCM435
DeliveryconditionOnly forged.
Length4m and up
Sizetolerance-0/+5mm
UltrasonicTestSep1921 Class C/c
Grade/Size/Quantity
SCM415 250x250 12 pcs 25 tons
SCM415 278x261 9 pcs 25 tons
SCM415 290x275 12 pcs 35 tons
SCM435 230x230 10 pcs 20 tons
SCM435 275x275 10 pcs 28 tons
SCM435 285x275 12 pcs 34 tons
Total167 tons.
Ifinterested,please contect with me.
Mill:JiangsuZhuhong Forging Co.,Ltd.

Forged round bar SAE8620
Specification:16MnCr5,20MnCr5,16CrNi4,20CrNi4,20NiCrMo2,18NiCrMo5,17CrNiMo6-4,A105,LF2,C40,C45,36CrMn5,
42CrMo4,39CrNiMo3,36CrNiMo4,40CrNiMo7,34CrNiMo6,
30NiCrMo12,34NiCrMo16,41CrAlNi7,34CrAlNi7,B7,B16,F11,
F12,F22,F5,F9,51Cr4.
Size:150mm to 700mm
Delivery condtion:Hot forged+Normalized/Annealed+Rough Machined/Turned+Q/T.
Length:4m and up or fix length according the enduser.
Ingot:EAF+LF+VD
Ultrasonic Test:Sep1921-84 Class 3 C/c.or D/d.
More details will be checked when firm inquiry,
Mill:Zhuhong Forging Co.,Ltd

Forged round bar,Grade:SAE8620(21CrNiMo2)
Delivery condition:Black surface.
Size:300mm to 600mm.
Length:4m to 6m.
Ultrasonic Test:Sep1921 Class 3 C/c.Quality is good,we wish customer that who interested to come to our mill to check the materials before buy.
Mill:Zhuhong Forging Co.,Ltd

Special steel pipe of Hollow forgings
Special steel of Hollow forgings
Steel Grade: S45C, 42CrMo4(we can do according your inquiry), SAE8620
Hollow Forging: 1000mm OD X 790mm ID X 2000mm(About size we can according your request)
Delivery condition: Hot forged+normalized+temper+rough machined.
Origin: China
UT: 6MMFBH Sep1921 Class C/c.
Properties:
Yield=310 Mpa Minimum; Tensile=600 Mpa minimum; %EI=13min
Surface Hardness=BHN160-220
Process: Forged from vacuum degassed ingots

Products:Forged steel round bar .
Delivery condtion:Hot forged+Rough Machined.
Specification:JIS G4051 S45C , C45 H13, SCM440, 42CrMo4, C45, , S355J2G3, A105, 16MnCr5, 39CrNiMo3, 34CrNiMo6, 30CiNiMo8.SAE8620.
100%UT:As per Sep1921-84 Class 3 C/c.
or according the customer's required.
Diameter tolerance:-0/+2mm
Straightness:<3mm href="http://beyond-steel.com/" m="">42CrMo4,CK45,16MnCr5,C60,34CrNiMo6,
SAE4340,18CrNiMo7-6,39CrNiMo3,SAE4130,S355J2G3.
H13 and others.
Both ends:plain square end with end hole remained and deburred.
Diameter tolerance:-0/+3mm
Straightness:2mm/M
Process and delivery condition:Hot forged+Rough machined+Q/T(black surface)
UT test:As per SEP 1921-84 Class 3 C/c.
Surface hardness:280-320BHN
Forging reduction ratio:3:1minimum.
Specification:AISI4140(we can do according the customer's specification)
Size:Dia700mm(we can do from dia150mm to dia950mm)
Mill test certificate:as per EN10204/3.1.B
Manufacture:Zhuhong forging Co.,Ltd
anything please contect with me:zhforging(at)yahoo(dot)com

SCM440, ASTM4140, 42CrMo
good quality and competitive price
We mainly manufacture more than 300 kinds of forging products with dia. of 80-800mm, such as
alloy structural steel:SCR440, ASTM4340,SCM440, ASTM4135...
alloy tool steel: SKT4, X210Cr12, ASTM6G, D2,D3, H11, H13...
carbon structural steel: CK15, ASTM1020, S45C...
carbon tool steel
bearing steel: GCr15, GCr15SiMn, G20Cr2Ni4A…
roller steel: 86CrMoV7,9CrV
stainless steel: 1Cr13, 2Cr13, 3Cr13, 4Cr13Mov
non-corrosive steel
refractory steel
spring steel: 50CrVA...
pinion steel
hardenability structural steel
Fabrication Process: EAF+LF+VD ( necessary)
UT+ Peeled +Turned + Heat Treatment (optional)
Standard: ASTM,BS,JIS,DIN etc.
Steel Grade (ASTM for example)
AISI 1020-1060
AISI 5115-5147
AISI 4118- 4140, 4340
E52100, S41000, W1, D3
410,420
Terms of Payment: L/C,T/T
Supply Ability: 500,000 Metric Ton per Year
Minimum Order: 20 Metric Ton
Packaging: in bulk
Detailed Product Description
ISO9001:2000 Certification
China Classification Society Certification

(NOTE : FOR SALE IN MALAYSIA ONLY).
Q&T PRE-HARDENED HIGH TENSILE CHROMIUM MOLYDENUM STEEL...
AISI 4140 HIGH TENSILE ALLOY STEEL BAR / PLATE ...
BS 709 HT ALLOY STEEL BAR / PLATE ...SCM 440 HT ALLOY STEEL ROD AND PLATE AVAILABLE...
WE CUT ANY LENGTH UP TO 6 METERS LONG ... VARIOUS DIAMETER AVAILABLE.
WE ALSO HAVE OTHER TOOL STEEL AVAILABLE SUCH AS AISI
1045, 1055, 4340, 4130, 3215, 01, D2, P20, H13, D6,S1,AR400,SUS301, SUS304,
SUS316, SUS316L, SUS420, SUS430, SUS440, 17-4PH AND GREY CAST IRON 4E, F25.

4340/1.6582, 4140/1.7225/SCM 440, S45C, AISI 410, AISI 420, SKD 11, SKS3

Product Name : Forged Steel Round Bar S45C/SCM440/SCM420 ; Type of Market : After Market ; Place of Origin : Wuxi China ; OEM NO : SCM440 ;
Application : HHummer (H1)
Hummer (H3)
Hyundai (Rohens, Veracruz, Equus, Azera, New Coupe, New Santa Ve)
Jeep (Cherokee, Commander, Compass, Jeepster)
MG (MG7, TF, MG3)

1. The standard: DIN-42CrMo4 JIS –SCM440 AISI-4140
2. Dia: 80mm-800mm
3. Length: 2000mm-5800mm,5900-12000mm
4. Process: EAF+LF+VD+Forged+Heat Treatment (optional)
5. Delivery condition: Hot forged +Rough machined+ Turned (optional)
6. Test: Ultrasonic test according to SEP 1921-84 3 C/c`
7. Technical Data: According to the customers requirement of Chemical Composition, Physical Properties and Mechanical Testing
8. Material details will be as per agreed technical specifications

Plasma post oxidation of nitrocarburized AISI 4140 steel
Alert
This article is not included in your organization's subscription. However, you may be able to access this article under your organization's agreement with Elsevier.
Insup LEECorresponding Author Contact Information, a, E-mail The Corresponding Author
aDepartment of Materials and Metallurgical Engineering, Dongeui University San 24 Gaya-dong Busanjin-gu Busan 614–714, Korea
Abstract
Plasma nitrocarburizing and plasma oxidizing treatments were performed to improve the wear and corrosion resistance of AISI 4140 steel. Plasma nitrocarburizing was conducted for 3 h at 570 °C in the nitrogen, hydrogen and methane atmosphere to produce the var epsilon-Fe2–3 (N, C) phase.
It was found that the compound layer produced by plasma nitrocarburising was predominantly composed of var epsilon-phase, with a small proportion of γ'-Fe4 (N, C) phase.
The thickness of the compound layer was about 10 μm and the diffusion layer was about 300 μm in thickness, respectively. Plasma post oxidation was performed on the nitrocarburized samples with various oxygen/hydrogen ratio at a constant temperature of 500 °C for 1 h.
The very thin magnetite (Fe3O4) layer 1–2 μm in thickness on top of the compound layer was obtained by plasma post oxidation.
It was confirmed that the corrosion characteristics of the nitrocarburized compound layer can be further improved by the application of the superficial magnetite layer.
Key words: plasma nitrocarburizing; post oxidation; var epsilon-Fe2–3(N, C); γ'-Fe4(N, C); Fe3O4

42CrMo SAE4140 SCM440 42CrMo4 1.7225 froged round steel bars
Dia:80-1500mm,
length:1.5-18meter
max capabilities(ton):35t per piece
GRADE:
froged round steel bars
S45C 41Cr4 42CrMo4
Cr12MoV D2 SKD11 X165CrMoV12 1.2601
CrWMn SKS31 105WCr6 1.2419
9SiCr 90CrSi5 1.2108
H13 X40CrMoV51 1.2344
5CrMnMo 6G SKT3 40CrMnMo7 1.2311
5CrNiMo 6F2 SKT4 55NiCrMoV6 1.2713
3Cr2W8V H21 SKD5 X30WCrV53 1.2567
35CrMo 4135 SCM435 34CrMo4 1.7220
42CrMo 4140 SCM440 42CrMo4 1.7225
40CrNiMoA 4340 SNCM439
45CrNiMoV
GCr15 52100 SUJ2 100Cr6 1.3505
GCr15SiMn 100CrMn6 1.3520

Description/Specification of Round Steel Bar
We mainly manufacture more than 300 kinds of forging products with dia. of 80-800mm, such as
alloy structural steel:SCR440, ASTM4340,SCM440, ASTM4135...
alloy tool steel: SKT4, X210Cr12, ASTM6G, D2,D3, H11, H13...
carbon structural steel: CK15, ASTM1020, S45C...
carbon tool steel
bearing steel: GCr15, GCr15SiMn, G20Cr2Ni4A…
roller steel: 86CrMoV7,9CrV
stainless steel: 1Cr13, 2Cr13, 3Cr13, 4Cr13Mov
non-corrosive steel
refractory steel
spring steel: 50CrVA...
pinion steel
hardenability structural steel
Fabrication Process: EAF+LF+VD ( necessary)
UT+ Peeled +Turned + Heat Treatment (optional)
Standard: ASTM,BS,JIS,DIN etc.
Steel Grade (ASTM for example)
AISI 1020-1060
AISI 5115-5147
AISI 4118- 4140, 4340
E52100, S41000, W1, D3
410,420
Baca Selengkapnya ...
Saturday, July 18, 2009

Steel Rounds bar 45#/S45C/1045/1.1191

Steel Rounds bar 45#/S45C/1045/1.1191

Product Categories for s45c forging
Forging Services - (397 companies)
In the forging process, metal is shaped by pressing, pounding, or squeezing under very high pressure, to form parts called forgings. Forging processes include cold forging or heading, impression or closed die, open die, and seamless rolled ring. Search by Specification | Learn More about Forging Services
Material:

* Alloy Steel
* Aluminum
* Copper Base
* Stainless Steel
* Steel
Process:

* Cold Forging / Heading
* Impression / Closed Die
* Open Die
* Seamless Rolled Ring
Secondary Operations:

* Heat Treating / Stress Relieving
* Machining
* Finishing / Painting
* Other

Forging Equipment - (18 companies)

Forging equipment uses compressive force to shape metal parts. Products include drop hammers, counterblow machines, roll forming equipment, upsetting equipment, and machines for cold forging, hot forging, warm forging, and radial forging. Learn More about Forging Equipment
Aluminum and Aluminum Alloys - (501 companies)

Aluminum and aluminum alloys are lightweight, non-ferrous metals with good corrosion resistance, ductility and strength. Search by Specification | Learn More about Aluminum and Aluminum Alloys
Hot and Cold Forming Machines - (45 companies)

Hot forming machines form metal that has been preheated. Cold forming machines form metal that has not been preheated. Learn More about Hot and Cold Forming Machines
Copper, Brass and Bronze Alloys - (376 companies)

Copper, brass and bronze alloys are non-ferrous metals with excellent electrical and thermal conductivity as well as good corrosion resistance, ductility and strength. Search by Specification | Learn More about Copper, Brass and Bronze Alloys
Carbon Steels and Alloy Steels - (714 companies)

Carbon steels and alloy steels are ferrous alloys that contain carbon and other alloying elements such as manganese, chromium, molybdenum, and nickel. Search by Specification | Learn More about Carbon Steels and Alloy Steels
Mold Making Services - (1508 companies)

Mold making services design and build tooling and patterns for a variety of molding processes, including investment casting, permanent mold casting, sand casting, die casting, lost foam casting, powder metal, die forging, injection molding, blow molding, extrusion, thermoforming, compression molding, rotational molding and others. Search by Specification | Learn More about Mold Making Services
Ferrous Metals and Iron Alloys - (1155 companies)

Ferrous metals and alloys are based on iron and include carbon steels, alloy steels, stainless steels, cast iron, cast steel, maraging steel, and specialty or proprietary iron-based alloys. Search by Specification | Learn More about Ferrous Metals and Iron Alloys
Metal Working Lubricants, Coolants and Fluids - (409 companies)

Metal working lubricants, coolants and fluids are specialized coatings and carriers for metal forming, metal cutting, lapping, polishing, and grinding applications. Search by Specification | Learn More about Metal Working Lubricants, Coolants and Fluids
Stainless Steel Alloys - (541 companies)

Stainless steel alloys are austenitic, ferritic, martensitic, precipitation hardened (PH), and duplex metal materials that are available in a wide variety of grades, shapes, and sizes. Search by Specification | Learn More about Stainless Steel Alloys
Cast Irons - (36 companies)

Cast iron is an alloy of iron with high amounts of carbon and includes ductile iron, gray iron and white cast iron grades. Search by Specification | Learn More about Cast Irons
Industrial Greases - (366 companies)

Industrial greases are thickened gels that consist of natural, synthetic, or semi-synthetic substances. They do not run off surfaces and are used in a variety of lubrication, sealing, and exclusion applications. Search by Specification | Learn More about Industrial Greases
Powder Compacting Equipment - (103 companies)

Powder compacting equipment is used to shape powders as part of a forming process and to compress a wide range of materials into compact shapes for ease of transportation and handling. Search by Specification | Learn More about Powder Compacting Equipment
Deburring and Deflashing Services - (101 companies)

Deburring and deflashing services serve to round sharp edges or corners and remove flash or parting lines from forging, casting or molding operations. Learn More about Deburring and Deflashing Services
Product Development Services - (1423 companies)

Product development services design, test, support, document, and certify industrial, commercial and consumer products. Search by Specification | Learn More about Product Development Services

Steel Rounds bar 45#/S45C/1045/1.1191

Carbon steel/Flat bar(45#/S45C/1045/1.1191) 1)Delivery condition: Hor-rolled,black surface ,Annealing,Hardness:160~210HBS. 2)Chemical composition: C=0.42~0.5, Si=0.17~0.35, Mn=0.50~0.8; P:≤0.035, S:≤ 0.035, Cr: ≤0.020,NI: ≤0.025. 3)Specification:Flat bar:Thickness:14/18/25/35..400mm,Width:185/225/..2200mm,Length:2000~5800mm 4)Payment:prepay 30% deposit,T/T or L/C at sight
Steel 4340/1.6582 >
Dia 50 x 325 mm x
Dia 130 x 25 mm
Dia 65 x 400 mm
Dia 35 x 400 mm x 1 pcs;

Steel 4140/1.7225 >
Dia 65 x 13 x 1 pcs,
Dia 70 x 20 mm , Dia 65 x 920 mm
Dia 65 x 3010 mm
Dia 35 x 240 mm

Steel S45C/1045/1.1730 >
# 50 X 50 X 350 mm
# 39 X 49 X 171 mm
# 72 X 43 X 198 mm
# 30 X 68 X 145 mm
# 30 X 400 X 400 mm
# 25 X 300 X 300 mm

# 10 X1005 X 1475 mm
Dia 150 X 45 mm
Dia 45 X 2550 mm
Dia 110 X 55 mm
Dia 36 X 39 mm
Dia 36 X 145 mm

Steel AISI 410 >
Dia 130 X 630 mm
Dia 130 X 60 mm
Dia 130 X 35 mm
Dia 85 x 22 mm
Dia 25 X 610 mm

Steel AISI 420 >
Dia 40 x 170 mm
Dia 55 x 95 mm
SKD 11 >
Dia 123 x 85 mm

Steel SKS3 >
# 20 x 75 x 1190 mm

1.product: steel round bar and square bar
meterial and spec:
10C(1010), 16mm-290mm
20C(1020), 8mm-420mm
45C(C45,S45C,1045), 6.5mm-480mm
30C(1030), 8mm-420mm
35C(1035), 8mm-420mm
40Cr(5140), 8mm-450mm
Q235B(Grade D),10mm-150mm
20Cr(5120), 8mm-450mm
42CrMo(4142) 14mm-450mm
35CrMo (4135) 14mm-450mm
30CrMo(4130) 14mm-450mm
40CrMnMo(4140) 13mm-450mm
40CrNiMo(4340) 16mm-450mm
Q345B(Grade 50) 16mm-365mm
50Mn(1053) 16-120mm
20CrNiMo(8620) 16mm-100mm
65Mn(1566) 16mm-220mm
40Mn2 16mm-290mm
45Mn2 16mm-290mm
60Si2Mn(9260) 16mm-290mm
T8(SK80) 8mm-400mm
20MnTi B 13mm-450mm
GCr15 16mm-320mm
ML35 8mm-290mm
T9(SK90) 8mm-400mm
T10(SK105) 8mm-400mm
T11 (SK105)8mm-400mm
T12 (SK120)8mm-400mm
20CrMnMo 13mm-400mm
50Cr 14mm-490mm
T13 8mm-400mm
Cr12 40mm-160mm
27SiMn 30mm-200mm
Cr12MoV 30mm-160mm
3Cr2W8V 100mm-260mm
GCr15SiMn 100mm-300mm
45Mn 100mm-230mm
ML20 12mm-100mm
2. stainless steel round bar
0CR18NI9(304,SUS304) 1.0mm-560mm
00CR19NI10(304L,SUS304L) 1.0mm-560mm
0CR25NI20(310S SUS310S) 1.0mm-560mm
0CR17NI12MO2(316,SUS316) 1.0mm-560mm
00CR17NI14MO2 (316L,SUS316L) 1.0mm-560mm
1CR18NI9TI(321,SUS321) 1.0mm-560mm


Commodity : Prime Steel Round Bar
Grade : S45C
Size/Qty : Dia. 160 mm = 30 MT
Dia. 170 mm = 30 MT
Dia. 180 mm = 30 MT
Dia. 190 mm = 30 MT
Dia. 200 mm = 30 MT
Dia. 210 mm = 30 MT
Dia. 220 mm = 30 MT
Dia. 230 mm = 30 MT
Dia. 240 mm = 30 MT
Dia. 250 mm = 30 MT
Dia. 260 mm = 30 MT
Dia. 270 mm = 30 MT
Dia. 280 mm = 30 MT
Dia. 290 mm = 30 MT
Dia. 300 mm = 30 MT
Total Qty : 450 MT
Length : 6,000 mm (if not possible, please advice the possible length)
Delivery Terms : CFR FO Jakarta
Shipment : Please advise


Carbon Tool Steel Bar / Carbon Steel / Steel Plate (S45C / S50C)
Carbon Tool Steel Bar / Carbon Steel / Steel Plate (S45C / S50C)
Product Group: Carbon tool steel
Product Description
Carbon Tool Steel Bar / Carbon Steel / Steel Plate (S45C / S50C)
Commodity:Carbon Steel Forged Bar
Steel Grade:S45C/ ASTM1045/ C45E/ Ck45/ 080M46/ 45#
Standard:DIN, JIS, ASTM, AISI, BS, SS, ISO, TOCT, GB
Most Competitive Range:50-300X50-300mm;25-300X80-600mm;Dia.20-350mm
Trademark: HLF. Henglongfa
Model: S45C, S50C
Standard: round and flat
Forged Round Steel Bar carbon steel S45C/SCM440
Delivery condition: Hot forged
Grade: SCM415, SCM440, S45C, S20C, H13, S355J2G3, D2.
UT: As per Sep1921-84 C/c.
Surface defect grinding: -0/+8mm
Straightness<=3mm/m Length: 3.0-5.0m End marks: Grade, heat no., size, length, weight. Size: Dia80mm to dia520mm. Grade: CK45, CK60, S355J2G3, A105, ST52-3, 42CrMo4V, 34CrNiMo6, 30CrNiMo8, 18CrNiMo7-6, 39NiCrMo3, 1.2714, H13, H11, P20, etc Carbon steel plate-S45C,S50C,SAE1045,SAE1050 a.Grade:S45C,S50C,SAE1045,SAE1050 b.Hardness:HB160-220
Plates-S45C,S50C,SAE1045,SAE1050:
a.Grade:S45C,S50C,SAE1045,SAE1050
b.Hardness:HB160-220 Anealing
c.Thicknessed availible for plates:
10,12,14,16,18,20,23,25,28,30,33,35,38,40,43,45,48,50,55,60,65,70,75,80,85,90,95,100,
105,110,115,125,135,145,155,165,175,205,210,220,235,240,245,250,260,265,280,285,295,300,
305,310,330,340(mm) ; cutted any sizes upon customer requestments.
d.Chemical Compositions(%):
C Mo Cr Si Mn Ni
0.42~0.5 0.10(Max) 0.40(Max) 0.15~0.4 0.5~0.8 0.40(Max)
e.Applications:Used for making mould bottoms,plastic mould , normal mechinery parts and so on.
f.Payment : 30% as deposite, and balance should be against on T/T or L/C at sight.

Related press releases
Sell S45C,S50C,SAE1045,SAE1050 carbon steel plates
Sell ASTM A283GrA,A283GrC,A283GrD,A283GrB carbon steel plate
Sell ASTM A36,1025,1010,1050,1015,1020,1040,1045 carbon steel plate
SM400A,SM400B,1025,St37-2,St37-3,A36,S10C carbon steel plate
Sell :AH32 FH32 DH40 AH36 FH36 steel plate or sheet
SM400A,SM400B,1025,St37-2,St37-3,A36,S10C carbon steel plate
SELL A633,S50C,S235JR,S690QL,S355NLQ420A steel plate
S10C,S15C,S20C,S45C,S50C,S55C,S70C steel plate
Sell ASTM A572Gr50,A572Gr42,A572Gr60,A572Gr65,A709Gr50,A633D steel plate
p20,718,P80,S45C,S55C,45,55,50Mn,SM45,SM55,NM360,NM400 steel plate

CARBON ALLOY TOOL STEEL BAR
Model: AISI JIS ASTM Brand: JAPAN Country of Origin: Made In Japan Product Description: (WE SELL WITHIN MALAYSIA ONLY) STANDARD LENGTH AND CUT TO LENGTH AVAILABLE... CARBON SHAFT AISI 1045, S45C, EN9, 760, ...
Keywords:4140 ROD , S45C SHAFT , 4340 BAR

Chemical System : Mn-C-S-P Material : 1045, AISI 1045,DIN CK45,JIS S45C,KS SM45C,SAE 1045,UNS G10450
Title : Data Sheet of 1045
Property : Physical property,Thermodynamic property


Metals Bank(KIMS)Heat : 0
Chemical System : Fe-Mn-C-S-P Material : 1046, AISI 1046,DIN CK45,JIS S45C,KS SM45C,SAE 1046,UNS G10460
Title : Data Sheet of 1046


Metals Bank(KIMS)Heat : 4
Chemical System : Fe-Mn-C-S-P Material : 1046, AISI 1046,DIN CK45,JIS S45C,KS SM45C,SAE 1046,UNS G10460
Title : Data Sheet of 1046
Property : Tensile property,Hardness


Metals Bank(KIMS)Heat : 4
Chemical System : Fe-Mn-C-S-P Material : 1046, AISI 1046,DIN CK45,JIS S45C,KS SM45C,SAE 1046,UNS G10460
Title : Data Sheet of 1046
Property : Tensile property,Hardness
Metals Bank(KIMS)Heat : 0
Chemical System : Fe-Mn-C-S-P Material : 1046, AISI 1046,DIN CK45,JIS S45C,KS SM45C,SAE 1046,UNS G10460
Title : Data Sheet of 1046
Metals Bank(KIMS)Heat : 3
Chemical System : Fe-Mn-C-S-P Material : 1046, AISI 1046,DIN CK45,JIS S45C,KS SM45C,SAE 1046,UNS G10460
Title : Data Sheet of 1046
Property : Physical property
Metals Bank(KIMS)Heat : 0
Chemical System : Fe-Mn-C-S-P Material : 1046, AISI 1046,DIN CK45,JIS S45C,KS SM45C,SAE 1046,UNS G10460
Title : Data Sheet of 1046
Metals Bank(KIMS)Heat : 0
Chemical System : Fe-Mn-C-S-P Material : 1045, AISI 1045,DIN CK45,JIS S45C,KS SM45C,SAE 1045,UNS G10450
Title : Data Sheet of 1045
Metals Bank(KIMS)Heat : 4
Chemical System : Fe-Mn-C-S-P Material : 1045, AISI 1045,DIN CK45,JIS S45C,KS SM45C,SAE 1045,UNS G10450
Title : Data Sheet of 1045
Property : Tensile property,Hardness
Metals Bank(KIMS)Heat : 4
Chemical System : Fe-Mn-C-S-P Material : 1045, AISI 1045,DIN CK45,JIS S45C,KS SM45C,SAE 1045,UNS G10450
Title : Data Sheet of 1045
Property : Tensile property,Hardness
Metals Bank(KIMS)Heat : 0
Chemical System : Fe-Mn-C-S-P Material : 1045, AISI 1045,DIN CK45,JIS S45C,KS SM45C,SAE 1045,UNS G10450
Title : Data Sheet of 1045
Metals Bank(KIMS)Heat : 0
Chemical System : Fe-Mn-C-S-P Material : 1045, AISI 1045,DIN CK45,JIS S45C,KS SM45C,SAE 1045,UNS G10450
Title : Data Sheet of 1045

Description:
Place of Origin: China Guangdong Model Number: 40#(1045,1.1191,S45C) Brand Name: Yingkou plastic mould steel: Red Terms of Payment: L/C,T/T Supply Ability: 2000 Ton per Month Minimum Order: 25 Ton Packaging: raw or customer requestments Delivery Lead Time: 3 days Detailed Product Description Features: SAE1045/S45C carbon steel plate 1). Grade: 50#(SAE1050,1.1210,S50C) 40#(SAE1045,1.1191,S45C) 2). Specification: 25/30/35/40/45/50/55/60/65/70/75/80/85MM, cutted any size by customer requestments Chemical composition: C=0.5, Si=0.3, Mn=0.6, S=0.02 3). Hardness: HBS=140~200 Anealing 4). Application: Used for making the mould bottom, plastic mould and normal mechinery parts. 5). Payment: 30% deposti, and balance are against on T/T or L/C at sight

1. The standard: DIN-C45 JIS –S45C AISI-1045
2. Dia: 80mm-800mm
3. Length: 2000mm-5800mm,5900-120000mm
4. Process: EAF+LF+VD+Forged+Heat Treatment(optional)
5. Delivery condition: Hot forged +Rough machined + Turned(optional)
6. Test: Ultrasonic test according to SEP 1921-84 3C/c`
7. Technical Data: According to the customer's requirement of Chemical Composition, Physical
Properties and Mechanical Testing
8. Material details will be as per agreed technical specification
Baca Selengkapnya ...

Steel, Angle, H-I Beam, Plate, Coil Sheet, Square Pipe

EQUAL ANGLE BAR Steel
EN EQUAL ANGLE BAR St37-2, St52-3, S235JR, S355JR "20X20-200X200"
GB EQUAL ANGLE BAR Q195, Q215, Q235, Q345 "20X20-200X200"
JIS EQUAL ANGLE BAR SS330, SS400, SM490A, SM490B "25X25-250X250"

Unequal Angle Bar Steel
STANDARD: GB, EN, JIS, ASTM, etc.
Material: Q235, Q345, S235JR, S335JR, SS400, GR50, etc.
SIZE: 20 x 20 x 3/4mm,
25 x 25 x 3/4mm,
30 x 30 x 3/4mm,
36 x 36 x 4/5mm
40 x 40 x 3/4/5mm
50 x 50 x 3/4/5/6mm
63 x 63 x 4/5/6/8/10mm
70 x 70 x 4/5/6/7/8mm
75 x 75 x 5/6/7/8/10mm
80 x 80 x 5/6/7/8/10mm
90 x 90 x 6/7/8/10/12mm
100 x 100 x 6/7/8/10/12/14/16mm
110 x 110 x 7/8/10/12/14mm
125 x 125 x 8/10/12/14mm
140 x 140 x 10/12/14/16mm
160 x 160 x 10/12 /14 /16mm
180 x 180 x 12/14/16/18mm
200 x 200 x 14/16/18/20/24mm

Channel Bar Steel
EN UPN & UPE St37-2, St52-3, S235JR, S355JR "UPE80-UPE400" "UPN30X5-UPN400"
GB STANDARD CHANNEL BAR Q195, Q215, Q235, Q345 "50X37-300X89"
JIS CHANNEL BAR SS330, SS400, SM490A, SM490B "75X40-380X100"


I-Beam Steel
EN IPE St37-2, St52-3, S235JR, S355JR "IPE80-180" "IPEAA80-180"
GB I-BEAM Q195, Q215, Q235, Q345 "100X68-550X170"
JIS I-BEAM SS330, SS400, SM490A, SM490B "100X75-600X190"


H-Beam Steel
GB STANDARD H-BEAM Q195, Q215, Q235, Q345 "HW100X100-HW400X400" "HM150X100-HM600X300" "HN100X50-HN800X300" "HP200X200-400X400"
JIS H-BEAM SS330, SS400, SM490A, SM490B "HOT ROLLED H-BEAM 100X50-912X302" "H-SHAPE STEEL PILES 200X204-502X470" "WELDED LIGHT GAUGE H STEEL 100X60-450X250"


Flat Steel Bar
Flat Steel Bar Carbon Structural Steel, Alloy Structural Steel, Spring Steel "THICKNESS 3-25MM"
JIS G3194
ASTM A29/A29M
DIN 1017
GOST103-76
GB/T


HOT ROLLED STEEL PLATE
Q235, Q345, SS400, SM490A, SM490B, S235JR, S355JR, ASTM
A36, ASTM A572 GRADE 42-65
"THICKNESS 6-200MM"


Checkered Steel Coil Sheet
Q235, Q345, SS400, SM490A, SM490B, S235JR, S355JR, ASTM A36, ASTM A572 GRADE 50



Square Pipe Steel
GB STANDARD SQUARE PIPE 25-160MM;50X25-200X100MM
JIS SQUARE PIPE 40X40X350X350;50X20-400X200
DIN SQUARE PIPE 5-400;20X10-500X300
EN 10210 SQUARE PIPE 40-400;50X30-500X300
EN10219 SQUARE PIPE 20-400;40X20-400X300
EN10305-5 15-100;20X10-120X60
ASTM SQUARE PIPE 1(25.4)-30(762.0);1X3(25.4X76.2)-30X30(750.0X500.0) INCH.(MM)
"THICKNESS 2.5-10MM"
Baca Selengkapnya ...

Product Steel

PRODUCT STEEL

Product
Unequal Angle Hot Rolled
Standards
Size Ranges Availabel
Products Detail

Product
UNP Hot Rolled
Standards
Size Ranges Availabel
Products Detail

Product
Honey Comb (Add Plate)
Standards
Size Ranges Availabel
Products Detail

Product
Cell Form
Standards
Size Ranges Availabel
Products Detail

Product
Honey Comb
Standards
Size Ranges Availabel
Products Detail

Product
Queen Cross
Standards
Size Ranges Availabel
Products Detail

Product
King Cross
Standards
Size Ranges Availabel
Products Detail

Product
T-Beam


Product
Rectangular Hollow Sect.
Standards
Size Ranges Availabel
Products Detail

Product
Square Hollow Section
Standards
Size Ranges Availabel
Products Detail

Product
Equal Angle Cold Formed
Standards
Size Ranges Availabel
Products Detail

Product
Coil
Standards
Size Ranges Availabel
Products Detail

Product
Steel Plate
Standards


Product
Anchor Bolt
Standards
Size Ranges Availabel
Products Detail

Product
Square Bar
Standards
Size Ranges Availabel
Products Detail

Product
Wire Rod
Standards
Size Ranges Availabel
Products Detail

Product
Round & Deform Bar
Standards
Size Ranges Availabel
Products Detail

Product
Nail
Standards
Size Ranges Availabel
Products Detail

Product
Annealed Wire
Standards
Size Ranges Availabel
Products Detail

Product
Nail Wire
Standards
Size Ranges Availabel
Products Detail

Product
Wire Mesh
Standards
Size Ranges Availabel
Size Ranges Availab
Baca Selengkapnya ...